SPECIFICATIONS:

NEW 2002


BASE MACHINE CAPACITY:
MAXIMUM CUTTING DIAMETER................13.78"
MAXIMUM CUTTING LENGTH...................7.87"
DISTACE BETWEEN SPINDLES................15.75"
SPINDLE CENTER HEIGHT FROMFLOOR.........47.44"

SPINDLES:
SPINDLE MOTORS(FANUC ALPHA 16/6000 X 2).20 HP
SPINDLE SPEED RANGE.....................45-4500 RPM
STANDARD CHUCK DIAMETER.................8"
SPINDLE NOSE............................A2-6
DRAWTUBE THROUGH HOLE DIAMETER..........2.01"
FRONT BEARING DIAMETER..................3.94"
MAXIMUM WEIGHT ON SPINDLE W/CHUCK.......242 LBS

AXIS DRIVES:
X AXIS TRAVEL...........................6.89"
Z AXIS TRAVEL...........................8.27"
X AXIS THRUST & Z AIXS THRUST...........1,543 / 1,708 FT/LBS
X & Z AXIS BALLSCREW DIAMETER...........1.10"
X & Z AXIS RAPID TRAVERSE RATE..........945 IPM
X AXIS POSITIONING WHEN NEW.............+-0.0006" / 3.94"
X AXIS REPEATABILITY WHEN NEW...........+-0.0001"
Z AXIS POSITIONING WHEN NEW.............+- 0.0009" / 11.81"
Z AXIS REPEATABILITY WHEN NEW...........+-0.0002"
FEEDRATES...............................0.0001 - 5.24 IPR
COOLING SYSTEM FOR BALLSCREW............FORCED OIL

TURRETS:
TURRET TYPE (FANUC ALPHA 6/2000 MOTOR)..V10 + V10
CURVIC COUPLING DIAMETER................6.61"
CLAMPING FORCE..........................6,173 LBS
INDEXING TIME(STATION TO STATION).......0.2 SEC.
STANDARD TOOL SIZE......................1.0" X 1.0"
MAXIMUM BORING BAR SIZE.................1.75" OD

MACHINE SIZE & MASS:
HEIGHT..................................126"
FLOOR SPACE REQUIREDMENT................113.4" X 161.5"
WEIGHT..................................15,432 LBS

NC LOADER INFORMATION:
3-AXIS SINGLE ARM CNC GANTRY LOADER WITH TURN OVER STATION , UP TO 
4,724 IPM, (16) STATION RIGHT SIDE ROTARY STACKER UNIT, 3 JAW LOADERS 
CHUCKS, TWO ACTUATORS.

WORKPIECE MAXIMUMS WITH THE LOADER:
DIAMETER................................7.87"
LENGTH..................................4.72"
WEIGHT..................................17.6LBS

LOADER SPEEDS / TIMES:

LONGITUDINAL (LEFT/RIGHT) A AXIS........4724 IPM
A AXIS STROKE...........................77.17"
VERTICAL B-AXIS.........................4,724 IPM
B-AXIS STROKE...........................33.46"
HORIZONTAL (IN/OUT) C AXIS..............1575 IPM
C AXIS STROKE...........................11.02"
LOADING TIME............................8 SECONDS
MINIMUM CYCLE TIME......................35 SECONDS

LOADER AND TURNOVER CHUCKS:
JAW STROKE..............................1.26"
ACTUATION METHOD........................FORCED AIR

EQUIPPED WITH THE FOLLOWING:

AUTOMATIC GANTRY LOADER WITH (16) STATION PALLET POOL
FANUC 18iT-B  CNC CONTROL
REAR DISCHARGE CHIP CONVEYOR
COOLANT TANK
(2) 8" JAW HYDRAULIC CHUCKS

Scroll Down for Pictures









PRICE....................: ${please call for price}