SPECIFICATIONS:

Bought new late 2004

Capacity:

Height of Centers......................7"
Distance between Centers...............40"
Swing over the Bed.....................14"
Swing over the Saddle Wings............13 3/16"
Swing over the Cross Slide.............7 13/16"
Cross Slide Travels....................8"
Tool Section Max.......................3/4"
Coolant................................2.5 Gallons

Bed:

Width & Height.........................10" & 10 1/4"

Headstock:

Spindle Nose (CamLock).................D1-5
Spindle through Hole...................1 5/8"
Spindle Taper..........................1 deg., 29 min. 15 seconds
Taper in Reduction Sleeve..............MT-4
Spindle Dia./front Bearing.............2.76"
Number of Spindle Speeds...............18
Spindle Speed Range (rpm)..............35-2400

Tailstock:

Quill Travel...........................5 1/2"
Quill Diameter.........................1 7/8"
Quill Taper Hole.......................MT-3

Motor-Main:

HP.....................................2.5/4.5
Volt...................................220
Amps Full Load Current.................22
Phase/Hz...............................3/60

Dimensions:

Length, Width, Heigth..................78" x 33" x 56"
Weight.................................2000 lbs

Other:

Coolant Pump Motor.....................0.07 hp
Spindle Motor Brake....................Electro-Magnetic w/Adj. Stop 
Speeds
Way Surface Hardness...................400-450 HB
Gear Box Lubrication...................Oil Bath w/Sight Glass
Emergency Stop Button..................2 - Headstock and at tailstock

Materials Cut: Aluminum & Stainless
Used 1.5 Hours Per Day (Light Use)

Equipped with the Following:

Proto-Trak SL CNC Control
(1) Collet Closure
(1) 8" 3 Jaw Manual Chuck
    Traking
    Door
    Work Light
    Tailstock
(1) Tool Post w/Misc holders

WE ARE ALWAYS INTERESTED IN BUYING ANY SOUTHWESTERN INDUSTRIES CNC 
LATHE OR MILL.






PRICE....................: ${please call for price}