SPECIFICATIONS:

Daewoo Puma TT2000SY (2004)

MAIN SPINDLE DIRECTION Horizontal
TURNING DIAMETERS.......... NOMINAL:8.300 
"...................MAXIMUM:15.400 "
TURNING LENGTHS.............NOMINAL:13.800 "............. 
....MAXIMUM:13.800 "
MAXIMUM SWING ................................................31.500 "
CHUCK DIAMETER..............STANDARD:8.000 
"..................MAXIMUM:10.000 "
COLLET TYPE/CAPACITY --
BAR CAPACITY................STANDARD:2.600 "

WORK SUPPORT COMPONENTS
MULTI-SPINDLE: No
NUMBER OF MAIN SPINDLES: 2

HEADSTOCK - SPINDLE 1
NOSE...........................................................A2-6
BORE...........................................................3.000 "
SPEED..........................................................5000 
RPM
DRIVE MOTOR (HP)...............................................29.5

HEADSTOCK - SPINDLE 2
NOSE...........................................................A2-6
BORE...........................................................3.000 "
SPEED..........................................................5000 
RPM
DRIVE MOTOR (HP)...............................................29.5

TOOLING / WEIGHTS / MEASURES TOOLING PRIMARY SECOND
TYPE........................Primary:Upper 
Turret...............Second:Lower Turret
MAX. NUMBER OF TOOLS
TURNING.....................Primary:12.........................Second:
12
ROTARY......................Primary:12.........................Second:
12
TOOL SHANK SIZE (inches)
SQUARE......................Primary:1.000".....................Second:
1.000 "
ROUND.......................Primary:1.600".....................Second:
1.600 "
ROTARY......................Primary:0.750".....................Second:
0.750 "
ROTARY TOOLING
HORSE POWER (30 
MIN.).......Primary:7.4........................Second:7.4
RPM.........................Primary:4000.......................Second:
4000
ON-CENTER MILL 
DRILL...........................................Standard
WITH 'C' 
AXIS..................................................Standard
OFF-CENTER MILL 
DRILL..........................................Standard
WITH 'Y' 
AXIS..................................................Standard

MAX. NUMBER OF SIMULTANEOUS CUTTING TOOLS: 2
FLOOR LAYOUT:
LENGTH.........................................................159 "
WIDTH..........................................................87 "
HEIGHT.........................................................98 "

AXIS SPECIFICATIONS
Std. No. Axes: 8 AXIS    TRAVEL              TRAVERSE               
RATE FEED RATE
X1 (Std.)................10.000 Inch...........787 IPM
Z1 (Std.)................31.500 Inch...........944 IPM
C1 (Std.)................360.000 Deg...........200 
RPM..................200 RPM
Y1 (Std.)................4.700 Inch............295 
IPM..................197 IPM
B1 (Std.)................31.900 Inch...........944 IPM
X2 (Std.)................7.500 Inch............787 
IPM..................197 IPM
Z2 (Std.)................35.400 Inch...........944 
IPM..................197 IPM
C2 (Std.)................360.000 Deg...........200 
RPM..................200 RPM

Equipped with the Following:
(2) Spindles
(2) Turrets
Full Y axis
Fanuc 18iTB
(2) 8" Chucks
(2) 12" Station Turrets
Tool Probe
Full C Axis on both Spindles
(8) Live Milling/Drilling Tool,(5) Straight (3) Right Angle
Chip Conveyor & Parts Conveyor
Cool Jet High Pressure-1,000 PSI

Hours
Cut - 3173
Operating - 6257
Power-On - 22160



PRICE....................: ${please call for price}