SPECIFICATIONS:

Equipped with the Following:

Trak LX-2 CNC Control
(1) Tailstock
(1) 12" 4 Jaw Manual Chuck or (1) 12" 6 Jaw Manual Chuck, one or the 
other not both
(1) Aloris Tool Post with (6) Holders
(1) Coolant System



Capacity:

Height of Centers.....................8 7/8"
Distance between Centers..............45"
Swing over the Bed....................17 11/16"
Swing over the Saddle Wings...........16 1/8"
Swing over the Cross Slide............10 15/32"
Cross-Slide travel....................9"
Tool Section Max......................1"
Coolant...............................4 gallons

Bed:

Width & Heigth........................12" & 11 1/2"

Headstock:

Spindle Nose (Camlock)................D1-6
Spindle through Hole..................2"
Spindle Taper.........................1 deg., 29 min., 15 seconds
Taper in the Reduction Sleeve.........MT-4
Spindle Diameter/Front Bearing........3.15"
Number of Spindle Speeds..............12
Spindle speed Range (rpm).............40-2200

Tailstock:

Quill Travel..........................6 1/4"
Quill Diameter........................2 15/16"
Quill Taper Hole......................MT-4

Motor-Main:

HP....................................7.5"
Volt..................................220/440
Amps full load current................31/16
Phase/Hz..............................3/60

Dimensions:

Length/Width/Height...................87" x 36" x 57"
Weight................................2600 lbs

Other:

Coolant pump..........................0.07 hp
Way Surface Hardness..................400-450 HB
Gear Box Lubrication..................Oil Bath w/sight Glass

WE ARE ALWAYS INTERESTED IN BUYING ANY SOUTHWESTERN INDUSTRIES CNC 
LATHE OR MILL.



PRICE....................: ${please call for price}