Okuma LU300BB/600 2006 (4) Axis Turning Center

SPECIFICATIONS:

USED OKUMA MODEL LU300BB/600 4-AXIS TWIN TURRET CNC LATHE
                       NEW 2006

2,053 Cutting Hours

SPECIFICATIONS

NUMBER OF CONTROLLED AXES................................4
SWING OVER BED...........................................20.87"
SWING OVER CARRIAGE......................................16.14"
DISTANCE BETWEEN CENTERS.................................23.62"
MAX. TURNING DIAMETER X LENGTH...........................14.57" X 
23.62"

SPINDLE
SPINDLE DIAMETER.........................................4.72"
SPINDLE NOSE TYPE........................................A2-8
THROUGH-SPINDLE HOLE.....................................3.14"
BAR CAPACITY.............................................2.75" 
(APPROX.)
NUMBER OF SPINDLE SPEED RANGES...........................INFINITELY 
VARIABLE AUTO 2 RANGES
SPINDLE SPEED............................................38 – 3,800 
RPM

CARRIAGE (Z-AXIS)
AXIS TRAVEL (UPPER)......................................25.20"
AXIS TRAVEL (LOWER)......................................24.21"
FEEDRATE.................................................0.00001 – 
39.37 IPR
RAPID FEEDRATE...........................................984.25 IPM

CROSS SLIDE..............................................(X-AXIS)
AXIS TRAVEL (UPPER)......................................7.28" + 2.95"
AXIS TRAVEL (LOWER)......................................4.13" + 1.38"
FEEDRATE.................................................0.00001 – 
39.37 IPR
RAPID FEEDRATE...........................................787.40 IPM

TURRET
UPPER....................................................V12
LOWER....................................................V8
NUMBER OF TOOLS..........................................20

TOOL SIZE
OD TURNING TOOLS.........................................1"
ID TURNING TOOLS.........................................1.57"

TAILSTOCK
SPINDLE DIAMETER.........................................3.54"
SPINDLE TAPER HOLE.......................................MT #5
SPINDLE TRAVEL...........................................4.72"

MOTOR
SPINDLE DRIVE MOTOR......................................20/30 HP
CARRIAGE FEED (Z-AXIS, UPPER)............................5.3 HP
CARRIAGE FEED (Z-AXIS, LOWER)............................5.3 HP
CROSS SLIDE FEED (X-AXIS, UPPER).........................5.3 HP
CROSS SLIDE FEED (X-AXIS, LOWER).........................4.4 HP
HYDRAULIC POWER UNIT PUMP................................3 HP
GUIDEWAY LUBRICATION PUMP................................0.024 HP
COOLANT PUMP.............................................1.067 HP

MACHINE HEIGHT...........................................85.67"
FLOOR SPACE REQUIRED.....................................155.51" X 
89.76"
NET WEIGHT...............................................18,040 LBS

ELECTRICS................................................440V, 3 PH, 
60 CYCLE

EQUIPPED WITH

OKUMA OSP-P100L CONTROL
BIG BORE WITH 10" CHUCK
30 HP
TAILSTOCK/LIVE CENTER
CHIP CONVEYOR SIDE DISCHARGE
CYCLE TIME REDUCTION SOFTWARE































PRICE....................: ${please call for price}