SPECIFICATIONS:
STANDARD ACCESSORIES:
Thread dial, steady rest w/rollers, oversized steady rest w/ rollers,
follow rest, coolant, taper attachment, 23-5/8" four jaw chuck with
solid reversible jaws, 12" dia. three jaw chuck with two sets of
solid jaws, longitudinal carriage stop, four way rapid traverse
halogen wWork light and 15 HP main motor
ELECTRICS: 220/440/volt, 3 phase, 60 Hz.
SPECIFICATIONS: SUMMIT MODEL 24-4 x 120B LATHE
CAPACITIES:
Swing over bed 25" (635mm)
Swing over cross slide 17" (430mm)
Swing over gap 32-5/8" (830mm)
Length of gap 15" (380mm)
Length of gap in front of faceplate 8-3/8" (213mm)
Distance between centers 120" (3000mm)
HEADSTOCK:
Spindle speeds--number 21
Spindle speeds--range 20 to 1250 rpm
Hole thru spindle 4-1/8" (105mm)
Spindle nose type D1-8 camlock
Headstock center No 6MT
Number of bearings on spindle 3
Main spindle bearing--Outside diameter 8-1/2" (220mm)
Main spindle bearing--Inside diameter 5" (130mm)
QUICK CHANGE GEARBOX:
Threads per inch--number 64
--range 1/4 to 60
Metric threads--number 64
--range 0.5 to 120
Module threads--number 64
--range 0.125 to 30
Diametral pitch--number 64
--range 1 to 240
Longitudinal feeds--number 124
--range .00145 to .44474
Cross feeds--number 124
--range .0007 to .22237
Leadscrew diameter/threads 2"/2 TPI
CARRIAGE & APRON:
Compound rest travel 5-3/8" (136mm)
Compound rest width 5-7/8" (150mm)
Cross slide travel 11-3/8" (290mm)
Cross slide depth of bridge 4-3/4" (120mm)
Cross slide width of bridge 8-1/4" (210mm)
Length of carriage bearing on ways 23"#" (584mm)
Graduation of apron handwheel .020" (0.5mm)
Travel of carriage per
revolution of handwheel 0.875" (22mm)
Graduation of carriage cross
slide handwheel (direct read) 0.002" (0.05mm)
TAILSTOCK:
Travel of spindle barrel 9-1/2" (241mm)
Diameter of spindle barrel 2-15/16" (75mm)
Taper #5 MT
Tailstock body--length on bed 13-3/4" (350mm)
Length of graduations on
tailstock barrel 6" (152mm)
BED:
Width of bed 15-3/4" (400mm)
Depth of bed 16-7/8" (429mm)
Hardened & ground inserted ways 42-48 Rockwell C
TAPER ATTACHMENT:
Degrees of taper +/- 10 degrees
Maximum turning length per setting 15-3/4" (400mm)
DRIVE & MOTORS:
Main drive motor 15 HP (11KW)
Coolant pump motor 1/4 HP (0.18KW)
MISCELLANEOUS:
Steady rest capacity--minimum 1/2" (12.5mm)
--maximum 6-1/8" (155mm)
Follow rest capacity--minimum 1/2" (12.5mm)
--maximum 7-7/8" (200mm)
SHIPPING DATA:
Overall (W x H x L) 48" x 60" x 194"
1220mm x 1525mm x 4925mm
Weight (approx) 8,000 lbs (3,635 kgs)
PRICE....................: ${please call for price}
