SPECIFICATIONS:
Model HiCELL CA-20
Control SEICOS LIII
Display 13.4" color CRT
Spindle speed 30 ~ 5,000 rpm, Single-speed motor configuration
Work holding 8" hollow 3-jaw chuck, 2.0" bar capacity
Spindle motor AC 20 HP (Cont.) / 25 HP (Peak)
Axes motors (AC) X-axis 2.4 HP / Z-axis 2.3 HP / Y-axis 1.3 HP
/ C-axis 1.3 HP
Axes rapid traverse rates X: 787 IPM / Z: 945 IPM / Y: 394 IPM
Live tooling turret 10-Station, 5-live positions w/ 5.0 HP (Peak)
spindle motor @ 3,000 rpm
ATC 12-tool automatic tool changer
C-axis Full CF-axis (Servo motor, gear driven)
Tailstock Programmable
Tool presetter Manually lowered
Coolant pump 3/4 HP rated at 60psi
Guide way type Linear guide ways
Chip conveyor Standard (Tall)
Specifications are subject to change without notice.
SPECIFICATIONS
Capacity HiCELL CA-20
Max. swing diameter Ø 15.75" (400 mm)
Swing over saddle Ø 15.75" (400 mm)
Max. turning diameter Ø 10.2" (259 mm)
Standard turning diameter Ø 10"
Max. turning length 19.7" (500 mm)
Chuck size Ø 8"
Bar capacity Ø 2.0" (51 mm)
Spindle HiCELL CA-20
Hole through draw tube Ø 2.05" (52 mm)
Hole through spindle Ø 2.32" (59 mm)
Spindle bearing dia. Ø 3.54" (90 mm)
Hydraulic cylinder Ø 8"
Spindle nose A2-6
Spindle motor type Mitsubishi AC motor #SJ-18.5BW4
Motor output (Cont.) 20 HP
Motor output (Peak) 25 HP
Motor base speed 460 RPM
Spindle drive system Direct belt drive
Spindle speed range 30 ~ 5,000 RPM
Spindle torque (Cont.) 91.14 ft-lb. / (50% ED) 124.42 ft-lb.
X, Y & Z axes HiCELL CA-20
X-axis travel 8.5" (216 mm)
Z-axis travel 20.9" (531 mm)
Y-axis travel 4.0" (102 mm)
X-axis rapid traverse 787 IPM (20 m/min.)
Z-axis rapid traverse 945 IPM (24 m/min.)
Y-axis rapid traverse 393 IPM (10 m/min.)
Cutting feed rate 393 IPM (10 m/min.)
Slide way type Linear guide ways
X-axis servo motor AC 2.4 HP (NEC #DFSM-1802-502A)
Y-axis servo motor AC 1.2 HP (NEC #DFSM-0925-502A)
Z-axis servo motor AC 2.3 HP (NEC #DFSM-1702-502A)
X/Z ball screw dia. / pitch Ø 1.26" (32 mm) / pitch 10
Specifications are subject to change without notice.
CF-axis HiCELL CA-20
CF-axis servo motor AC 1.3 HP (NEC #DFSM-1020-502A)
Cutting feed rate 5.56 RPM (12,000° / min)
Rapid feed rate 33.3 RPM (0 ~ 2,000° / min)
Min. indexing angle +/- 0.001°
Dynamic accuracy +/- 0.02°
Tailstock HiCELL CA-20
Center taper MT#5 (Live center)
Tailstock base travel 24.8" (630 mm)
Programmable base Positions by separate ball screw and motor
Live tooling turret HiCELL CA-20
Number of stations 10
Number of live stations 5
Turret index motor Yaskawa AC motor #EELQ-5IT, 1 HP
Live tooling motor Mitsubishi AC motor #SJ-N3.7AM, 3.0 HP (Cont.) /
5.0 HP (Peak)
Turret index type Single-step @ 0.3 sec.
OD tool shank size ? 1"
ID tool shank size Up to Ø 1.5"
Rotating tool drill diameter Max. - Ø 5/8" (16 mm)
Rotating tool tap diameter Max. - Ø M12
Rotating tool end mill dia. Max. - Ø 3/4" (20 mm)
Rotating tool spindle hole X/Z Ø20 straight / NT40
Tooling Kennametal KV-45 quick-change tooling (QCT40)
Live tooling RPM 100 ~ 3,000 rpm (Belt driven)
ATC HiCELL CA-20
No. of storable tools 12
ATC type Twin arm
Tool selection system Random
Maximum tool length 7.9" (200 mm)
Maximum tool diameter Ø 3.3" (85 mm)
Maximum tool weight 13.2 lbs. (6 Kg)
Specifications are subject to change without notice.
Parts catcher HiCELL CA-20
Maximum part diameter Ø 2.55" (65 mm)
Maximum part length 5.9" (150 mm)
Maximum part weight 6.6 lbs. (3 Kg)
General Specification HiCELL CA-20
Positioning accuracy +/- 0.0002" (+/- 0.005 mm)
Repeatability +/- 0.0001" (+/- 0.003 mm)
CNC control Seicos LIII
Voltage AC 200/220 +/- 10% 3 phase
Power requirement 27 KVA (100A fuse capacity)
Hydraulic tank capacity 8 gal. (30 L)
Coolant tank capacity 31 gal. (120 L)
Coolant pump 3/4 HP rated at 60psi
Machine weight 11,000 lbs. (5,000 kg)
Dimensions L X W X H 122.2" x 81.1" x 78.9"
(3103 x 2060 x 2004 mm)
Dimensions
w/ chip conveyor 160" x 81.1" x 78.9"
(4064 x 2060 x 2004 mm)
Specifications are subject to change without notice.
PRICE....................: ${please call for price}
