SPECIFICATIONS:
Southwestern Industries, Inc.
2002 TRAK DPMV5 Bed Milling Machine with the ProtoTRAK VM CNC
Equipped with:
Power draw bar
Work lamp
Coolant pump
Remote stop/go
Limit switch.
Machine specifications
" Table size - 50" x 12"
" T-slots (number x width x pitch) - 3 x 63" x 2.52"
" Travel (X, Y, Z axis) - 40" x 20" x 19"
" Quill diameter - 4.13"
" Spindle taper - #40
" Spindle speed range RPM - 160-4000
" Spindle center to column face - 20.5"
" Spindle motor power - 5 HP
" Power requirement - 50 HZ/60 HZ; 3 phase, 220V, 40 FLA
" Machine net weight on table - 4400 lbs.
" Maximum weight of workpiece - 1320 lbs.
" Height of table from bottom of bed - 48"
" Maximum spindle nose to table - 19"
" Minimum table height - 85"
" Maximum table height - 100"
" Width of machine including table - 94"
" Length with electric box door closed - 81"
" Overall width including full table travel - 136"
" Overall length with electrical door open - 105"
" Footprint - 24" x 48.4"
" Way surface - dovetail X axis; square ways Y and Z axis
" Weight (approximate) net - 4400 lbs.
" Weight (approximate) shipping - 4700 lbs.
" Pallet size - 6' x 6'
" Maximum work capacities - Drilling (mild steel) max. dia. 1.00";
tapping, 5/8"; milling capacities, 5 inch3/min
" Way surfaces hardened and ground
" Turcite coating on all slide ways
" Automatic lubrication pump
" Quill diameter 4.13"
ProtoTRAK VM CNC - the control on the TRAK V Series Bed Mills
Hardware Specifications
" Two or three-axis CNC, three-axis DRO
" Pentium processor with built-in video and Ethernet cards
" 32 MB or RAM with expansion slots available
" Hard drive
" TEAC floppy disk drive
" Ports and connectors: P/S 2 keyboard and mouse, RS232, RJ45
" 10.4" color active-matrix display
" Override of programmed feedrate and rapid with graphical indicator
" Polycarbonate sealed membrane with LED status lights
" Gasket sealed enclosures
" Brushless A.C. servomotors rated at 704 in-oz continuous torque
" Integrated motor encoders with .000025" underlying resolution.
" 250 IPM rapid traverse
" Precision ground ballscrews in the table, saddle, and column
" Programmable spindle speed
" Override of programmed spindle speed with graphical indicator
" Electronic handwheels
" Yaskawa AC spindle drive
" Digital servo amplifiers custom designed for mill operation
" Auxiliary functions: spray mist, coolant, spindle off and an input
to a programmable rotary table or indexer
" Tapping with a floating tapping head
Software Specifications
" Windows operating system with access to Windows desktop
" Versatile: select between manual, two or three-axis CNC
" Auto Geometry Engine
" Two or three-axis circular interpolation
" Linear interpolation
" Six modes of operation
" Color graphics with adjustable views
" Icon-prompted tool set-up
" Automatic diameter cutter compensation
" Tool length offsets with modifiers
" Advanced diagnostic routines
" Jog and Power feed in DRO mode
" Selectable fine/course manual traverse
" Go To - traverse stops at dimension selected
" Automatic return to absolute zero
" Incremental and Absolute position readout
" Teach-in of manual moves
" Inch/mm selectable
" Scaling of print data
" Alpha-numeric program names
" Event comments
" Selectable tool path or part geometry programming
" Convenient canned cycles for all geometry
" Circular, rectangular or irregular pockets, islands and profiles
" Helix and thread milling routines
" Repeat of programmed events
" LOOK - program graphics with a single button push
" List step - graphics with programmed events displayed
" Conrad - one input for automatic corner radius
" Incremental and Absolute programming
" Subroutine and copy of programmed events
" Mirror with selectable cutting order
" Rotate
" Program diagnostics
" CAD/CAM interface
" Math helps with prompted graphical interface
" Tool stepover adjustable for pocket routines
" Selectable ramp or plunge cutter entry
" Spreadsheet editing
" Global data change
" Clipboard to copy events between programs
" Trial run
" TRAKing - manual control of CNC program run
" Real time run graphics with tool icon
" Access to networked drives
" Automatic file back-up routine
PRICE....................: ${please call for price}
