SPECIFICATIONS:

We are pleased to quote as follows:
ONE - USED HEM HEAVY DUTY DUAL COLUMN HORIZONTAL BAND SAW
MODEL WF190M-DC  "  SN-647398  "  YEAR: 1998
Stock No. 7892
Specifications
Saw capacity:	
	Round:	25"
	Flat:	40"
	(designed to cut 37" wide flange beams)
Blade size:	2" x 28'6" x .063 thick
Blade speeds:	70 - 350 SFM
Electrical:	15 HP motor drive, 220/440 v (currently wired @ 440v)
	3 phase, 1/12 HP coolant pump
Hydraulics:	5 HP hydraulic system
Approx Weight:	14,000 lbs
Approx Dimensions:	17' L x 8' W x 9'11" H


Equipped with:
"	9.2 Degree permanently canted head
"	Full Capacity Down Clamps - For vertical clamping of structural 
shapes and when entire "mill bundles" are to be cut
"	Bi Directional Outboard Powered Vise for Discharge - Holds material 
on the discharge side of the blade for "back trimming" and keeps parts
 from closing during the cut.  It provides an additional clamping 
surface; works in conjuction with main saw vise but can be 
disconnected by a control valve.  The use of this vise will decrease 
"burr" on the cut material.
"	Shadow Light - High intensity light casting a shadow of the blade on
 the material to be cut, indicating the exact spot where the blade 
enters the material
"	Machine is designed to minimize material handling with the 
introduction of rollers in the base of the machine for stock movement.
  This prevents material from being dragged across the normal vise way
 assembly
"	Free standing control remotely controls saw operation - Raise, stop,
 cut and cutting pressure; blade speed, guide arm, and coolant system.
  All modular construction
"	Fixed vise (datum line) opens with full stroking moveable vise to 
provide clamping for mill bundles and elimates banding interference


Equipped with (con't):

"	Total enclosed, running in oil, gear reducer with variable speed 
drive of 70-325 SFPM.  Remote speed change with tachometer readout on 
control console
"	Discharge table for easier material handling after the cut.  The 
table is 24" in length and standard with rollers.  Table is welded on 
to machine base and is fully coolant panned to return coolant to the 
machine
"	Guide Cap Camlocks assure proper clamping of carbide blade guides, 
with adhustable pre-set and quick release action for fast blade 
changes
"	Powered brush assembly (brush size ½" x 4")
"	Full stroking vising
"	Powered blade tension
"	Powered moveable guide arm
"	Adjustable clamping pressure
"	Adustable cutting pressure
"	Adjustable feed rate
"	Unist Mist Lubrication System






PRICE....................: ${please call for price}