DPM SX3P

SOUTHWESTERN INDUSTRIES

DPM SX3P

103815

2012

Southwestern Industries Trak DPM-SX3P (2012) (X,Y,Z) 31"x17"x23.5", Trak SMX Control, Power Draw Bar. Programmable Spindle

Product Specification

TRAK DPM SX3P

 Our most popular bed mill due to its combination of low price and great specs

Like all TRAK SX Bed Mills, the DPM SX3P features:

  • ProtoTRAK SMX CNC
  • A solid ram that moves along the column providing mass for heavy cuts
  • Generous Z-axis CNC travel
  • Strong and rigid construction
  • Real handwheels for manual control
  • Two or three-axis CNC operation, your choice
  • Programmable spindle speeds
  • Precision ground ballscrews installed in the table, saddle and column
  • Manual quill with integrated quill and ram encoders
  • Wide way surfaces are hardened and ground, slideways are Turcite® coated

With these important differences:

  • 5 hp spindle motor
  • NMTB40 spindle taper and almost 4″ quill diameter
  • Travels X, Y and Z: 31″x17″x23.5″
    • Table Size – 50″ x 10″
    • Travel (X, Y, Z axis) – 31 x 17 x 23.5″
    • Quill Diameter – 3 15/16″
    • Maximum Quill Travel – 5″
    • Spindle Taper – NMTB 40
    • Spindle Speed Range – 40-600, 300-5000
    • Spindle Center to Column Face – 19″
    • Spindle Motor Power – 5 HP
    • Power requirements, control – 110V; 1P; 8A
    • Power requirements, machine – 220V;3P; 17A
    • Maximum Weight of Workpiece – 1320 lbs.
    • Height of table from bottom of bed – 38″
    • Max spindle nose to table – 23.5″
    • Min height – 85″
    • Max height – 95″
    • Width of machine including table – 73″
    • Length with electric box door closed – 66″
    • Overall width incl full table traverse – 108″
    • Overall length with electrical door open – 76″
    • Footprint of Machine – 24″ x 44″
    • Weight net / shipping lbs. – 4100 / 4400
    • Rapid traverse X, Y, Z – 150 IPM
    • Auto Lube Pump
    • Precision ground ballscrews in the table, saddle and ram
    • Chrome hardened and ground quill
    • Meehanite castings
    • Slide ways are Turcite coated
    • Wide way surfaces are hardened and ground
    • Drilling max capacity – 1″
    • Milling max capacity – 5 inch3/min
    • Tapping max capacity – 1″

  • Equipped With:

          Prototrak SMX CNC Control
          Programmable Spindle
  DXF File Converter
          Adv. Features
          Aux Options
          Coolant Pump 
          Chip Tray/Splash Shield
          Power Draw Bar

Request A Quote

Request A Quote

Thank you for your interest in RJ Machinery Equipment. Please fill out the required information.

I am inquiring about the following:

SOUTHWESTERN INDUSTRIES
DPM SX3P
103815
2012

Contact Information:


 Save my information for another quote
 

Captcha Code

Click the image to see another captcha.