Mikron HSM 600U

Mikron HSM 600U



+GF+ AgieCharmilles Mikron HSM 600U (2011) 2- Available Travels (X,Y,Z): 23.622 x 23.622x 19.685 in,Heidenheain iTNC530, 24,000RPM, Toolchanger TCD 50 HSK A 63

Product Specification

6,522 & 12,691 Spindle hours


Travels (X,Y,Z):  23.622 x 23.622x 19.685 in (600mm, 600mm, 500mm)
Max Feed Force
(X): 1878.75 lbf (8.35kN)
(Y): 1158.75 lbf  (5.15kN)
(Z): 900 lbf (4kN)
Recommended Max Feed Rate: 1576 in/min (40M/mm)
Rapid Traverse (All Axis): 1576 in/min (40M/mm)
Base: Polymer Concrete
Measurement system rotary encoder. 2048 Increments 0.1 in glass scale positioning
00000.4 in glass scale positioning
Table Surface: In Accordance with Pallet Size
Max. Table Load: 265 Lbs. (120 kg)
Control: Heidenheain iTNC530
Spindle - Speed Range: 100 - 24,000 RPM
Spindle - Power (40% duty cycle): 16.77 HP (12.5 KW)
Spindle - Tool Clamping: HSK63A
Spindle - Number of Tool Positions: 30
Noise Emission: 70 and 75dB (A)
Heindehain iTNC 530
APS (Advanced Processing System) 
Ethernet Interface
Guide System
Number of Axis: 5+1
Linear Interpolation: 5 out of 5 Axis
Circular Interpolation: 3 out 3 axis
Helical Interpolation: YES
Spline: YES
Screen: 15" Color - TFT
Graphic: Digital XGA 1024 by 768
CPU: INTEL Pentium III/800 MHz
Parallel Mode: Yes with Graphic Support
Programming: Dialogue and DIN/ISO
Programming Aides: Free Contour Programming, Calculator, Graphic Support for Cycles
Input Dimensions: 0.0001mm (0.000004")
Zero Shifts: Seveal tab. With 254 zero positions
Axe Deviation Compensation: 64 points per Axis
NC Program Memory: 26GB/30 Million Block
Look Ahead: 256 Blocks
Central Tool Buffer: 30000 Tools
Data Interface: V24 RS 232C/V11 RS 422/Ethernet
Baud rate: Max. 100M bit Via Ethernet
Block Process Time: 0.5 ms
Position Regular Cycle: 1.8 ms
Encoder Cycle Time: 0.6 ms
Spindle Override: 70 - 120 %
Feed Override: 0 - 150 %
Error Display: Clear Text
Custom Specific Cycles: Yes/Parameter
Cycles: Boring, Turning, Drilling, Tapping, Contour Pockets, Hole Circle, Groove Milling, Rectangular Pockets, Circular Pockets, Peck Drilling, Reaming, Tappet Fine Machining, Contour Drive. 

Equipped With:
Heidenheain iTNC 530 CNC Control
ITC (Intelligent Thermal Control)
ITC 5 Axis
Laser tool Measuring
Machine Enclosure
Movable Electronic Hand Wheels
Rotary Tilting Table With Dynafix
Rotating Window
Preparation for Touch Probe PS 32.00
Pallet Dynafix 280 x 280
Spindle 24,000 RPM HSK A63 HP CTS
Toolchanger TCD 50 HSK A 63
Tool Cleaning By Air Blast
Chip Conveyor for Higher Demands
Paper Roll Filler unit 580l for TSC 18-70 Bar
Touch Probe PS 32.00 HSK A 63
Rotary Tilting Table with UPC
Pallet Changer Dynafix
(6) Additional Dynafix 280 x 280 Pallets (7 Total)
Electrical Requirements:
Main Voltage: 3 Phase 400 Volt 50Hz
Permitted Main Frequency Fluctuation: +/- 2%
Total Installed Rated Load: 12kW (16.103 HP)
Permitted Main Voltage Fluctuation: +/- 6% 3 Phase 400 Volt at no load and full load
Control Voltage: 24 Volt DC

Request A Quote

Request A Quote

Thank you for your interest in RJ Machinery Equipment. Please fill out the required information.

I am inquiring about the following:

Mikron HSM 600U

Contact Information:

 Save my information for another quote

Captcha Code

Click the image to see another captcha.