VTC 1600

Giddings & Lewis

VTC 1600

104081

2000

Giddings & Lewis VTC 1600 (2000) Vertical Turret Lathe

Product Specification

 1600 VERTICAL TURNING CENTER

Capacity                                                     Metric    Inch

 

Maximum swing---------------------------- 2000 mm (78.74)

Maximum facing capacity------------------ 2000 mm (78.74)

Maximum height from table top to bottom of ram -------------------- 2500 mm (98.43)

Minimum height under rail from table----- 1000 mm (39.37)

 Table speeds  2 ranges, inf. Variable---- 4  400 RPM

 Ram Head

Wedge Lock Tool clamping system

Ram Size--------------------------------- 250 mm (9.843)sq.

Vertical Travel  Z axis

  Total Ram Travel--------------------- 1750 mm (68.89)

Horizontal Travel  X axis

  Right of center (+ X axis)----------- 1210 mm (47.63)

  Left of center (-X Axis) ------------ 1210 mm (47.63)

 Cross Slide

Infinitely adjustable cross slide

Programmable cross slide adjustment with two-(2)

Heidenhain absolute linear Scales 
V axis Linearways,hydraulic cylinder elevation andmechanical clamping.

 Feed and Traverse Rates

Rapid Traverse Rate, X & Z axis---------- 20,000 mm/min (787 IPM)

Feedrates per minute infinitely variable,

  X & Z axis--------------------------- .100-20,000 mm/min  (.004  787 IPM)

Feedrates per revolution, X & Z axis--Within above range

Feed thrust available, X & Z axis down--- 34,000 N (7,600 Lbs.)

Feed thrust available, Z axis up--------- 21,000 (5,000 Lbs.)

Cross Slide Elevating rate, V-Axis ---- 800 mm/min (32 IPM)

 Linear Positioning Performance per ISO-230-2-97 standard

X & Z axis, bi-directional absolute data

  Positioning accuracy A--------------- 0.015 mm (.0006)

  Positioning Repeatability R---------- 0.010 mm (.0004)

  Reversal B ------------------------- 0.005 mm (.0002)

 Axis Feedback

Heidenhain absolute linear scales on X , Z and V axis

 Table

One (1) 1600 mm (62.99) diameter plain table with

parallel tee slots and 12 equally spaced radial

T-slots

Pilot bore diameter----------------------- 200 mm (7.87)

One (1) set of four (4) face plate jaws (8 in)

 Table Base

Two Speed Table Drive Transmission; 4:1 Gear ratio

AC Drive Motor - ------------------------- Fanuc

  S6-40% rating------------------------- 75 kW 100.6 HP)

  Continuous rating--------------------- 60 kW (80.4 HP)

Table/Chuck Speed

  Low Range----------------------------- 4 - 125 RPM

  High Range---------------------------- 15 - 400 RPM

Constant Torque

  Low Range----------------------------- 4 - 29 RPM

  High Range---------------------------- 15 - 117 RPM

Table Bearings

  Heavy Duty Thrust Bearing

   O.D. -- axial load---------------- 635 mm (25.00)

  Taper Roller Bearing

   O.D. -- radial load--------------- 420 mm (16.50)

Thrust Bearing Load Capacity

  At 33 1/3 RPM------------------------- 82,200 kg  (181,200 Lbs.)

  At maximum RPM------------------------ 36,400 kg (80,200 Lbs.)

 Giddings & Lewis Wedge Lock Tooling System

  Tool shank taper ---------------------- 2:1 Taper

  Wedge lock clamping------------------- 150,000N (33,000 Lbs.)

  Gauge diameter------------------------ 160 mm (6.3)

 12 Position Toolchanger

Right Hand Floor Mounted, for Static Tools Only

Toolchanger Capacity

  Maximum tool diameter----------------- 410 mm (16.14)

  Maximum tool thickness

   adjacent pocket full-------------- 203 mm (8.00)

  Maximum tool length------------------- 700 mm (27.55)

  Maximum tool weight------------------- 114 kg (250 Lbs

  Maximum matrix weight capacity----- 1500 kg (3,300 lbs)

 

Request A Quote

Request A Quote

Thank you for your interest in RJ Machinery Equipment. Please fill out the required information.

I am inquiring about the following:

Giddings & Lewis
VTC 1600
104081
2000

Contact Information:


 Save my information for another quote
 

Captcha Code

Click the image to see another captcha.