Equipment

Browse our ever-growing inventory to find your next machine!

Southwestern Industries Trak 2OP M-11 (2020) Portable Vertical Machining Center Prototrak TMX CNC Control

Model
2OP M-11

Year
2020

Stock #
104190

Condition
Used

Specifications

Equipped With

Machine Specifications
Width of machine 30.5”
Depth of machine 52”
Height of mill with head all the way up 101”
Minimum height to fit mill through doorway 92”
(Z cable carrier collapsed, resistor cover and resistors removed)
Table Dimensions Table size 18” x 15”
Number of tee slots and pitch 4 @ 63 mm
Tee slot width 0.630” or 16 mm
Table maximum load 500 lbs.
Ball Lock ® hold down force 2250 lbs @ 35 in/lbs of torque
Machine Weight ~2825 lbs
Machine Shipping Weight ~3175 lbs
Travel X-axis 14”
Y-axis 18” (12” of machining travel)
Z-axis 17”
Maximum distance from spindle nose table surface 20.25”
Minimum distance from spindle nose table surface 2.75”
Maximum swing clearance from spindle center to column 14”
Maximum Rapid speed X, Y & Z-axis, inches per minute 600
Spindle Tool holder type BT30
Spindle nose diameter 2.2” or 56 mm
Maximum RPM Horsepower 6000 3 HP
Automatic Tool Changer
Tool Capacity 8
Maximum tool diameter 2”
Retention knob BT30 Page 2 of 4
Air Requirements
Pressure 90 psi
Quality CFM SCFM Air dried/filtered water separator upstream of the machine 2.5 at 90 psi 18
Auto Lube Pump 
Fluorescent Worklamp 
Coolant Pump 
Limit Switches  
Electronic Handwheel 
4 Ball Lock Receivers in table 
Pallet Jack 
Main Electrical Power Cord with Plug 
Removable chip pan 

Equipped With
 ProtoTRAK TMX 
10,000 RPM 
Indexer Ready 

Please go to www.southwesternindustries.com for complete software specifications

**SPECIFICATION SHOWN ARE TO BE USED AS A GUIDELINE ONLY. IT IS THE CUSTOMERS RESPONSIBILITY TO CHECK FOR SIZE AND FEATURES BEFORE PURCHASING. WE WILL NOT BE RESPONSIBLE FOR ERROR OR OMISSIONS WRITTEN OR VERBAL.

 

Request a Quote