Equipment

Browse our ever-growing inventory to find your next machine!

Southwestern Industries Trak DPM S5 (2004) Prototrak SM CNC Control

Model
TRAK DPM S5

Year
2004

Stock #
104224

Condition
Used

Specifications

Equipped With

https://youtube.com/watch?v=dfff1-a9ePI&feature=share

TRAK DPMS5 Machine Specifications

·         Table Size –50” X 12”

·         T-Slots (number x width x pitch)- 3 x .63” x 2.52”

·         Travel (X,Y,Z axis)- 40” x 20” x 23.5”

·         Maximum Quill Travel – 5”

·         Quill Diameter – 3 15/16”

·         Spindle Taper – NST 40

·         Spindle Speed Range – 70-3950 RPM

·         Spindle center to column face – 20”

·         Spindle Motor Power – 5 HP

·         Power Requirement Control – 110V; 1P; 10A

·         Power Requirement Machine – 220/440V; 3P; 14/7A

·         Maximum weight of workpiece – 1760 lbs.

·         Height of table from bottom of bed – 41”

·         Maximum spindle nose to table – 23.5”

·         Minimum height – 87”

·         Maximum height – 98”

·         Width of machine including table – 94”

·         Length with electric box door closed – 81”

·         Overall width including full table traverse – 136”

·         Overall length with electrical door open – 77”

·         Footprint of machine – 24” x 48.4”

·         Weight net/shipping lbs. – 4400/4600

·         Maximum work capacities in mild steel – Drilling 1” dia., Tapping 1”, Milling 5in/ min

·         Maximum rapid feed – 150 IPM

·         Wide way surfaces are hardened and ground

·         Slide ways Turcite coated

·         Precision ground ballscrews installed in the table, ram and column

·         Solid ram moves up and down for Z-axis operation, providing mass for heavy cuts

·         Real handwheels so you can work manually

 

ProtoTRAK SM CNC - the control on the TRAK S Series Bed Mill

 

Hardware Specifications

·         Two of three-axis CNC, three-axis DRO

·         Pentium processor with built-in video and Ethernet cards

·         32 MB or RAM with expansion slots available

·         Flash drive

·         TEAC floppy disk drive

·         Ports and connectors: P/S 2 keyboard and mouse, RS232, RJ45

·         10.4” color active-matrix display

·         Override of programmed feedrate and rapid with graphical indicator

·         Polycarbonate sealed membrane with LED status lights

·         Gasket sealed enclosures

·         Servo motors – 560 in-oz torque

·         Integrated ram and quill encoders

Software Specifications

·         Windows operating system

·         Selectable two or three-axis CNC

·         Auto Geometry Engine

·         Automatic diameter cutter compensation

·         Two or three-axis circular interpolation

·         Rotate

·         Look – Program graphics with a single button push

·         Linear interpolation

·         Six modes of operation

·         Color graphics with adjustable views

·         Tool length offset with modifiers

·         Advanced diagnostic routines

·         Jog and Powerfeed in DRO mode

·         Automatic return to ABS zero

·         Incremental and Absolute position readout

·         Inch/mm selectable

·         Teach-in of manual moves.

·         Alpha-numeric program names

·         Scaling of print data

·         Event comments

·         Selectable Tool Path or Part Geometry programming

·         Convenient canned cycles for all geometry

·         Circular, rectangular or irregular pockets, islands and profiles

·         Helix and thread milling routines

·         Subroutine and copy of programmed events

·         Mirror with selectable cutting order

·         List step – graphics with programmed events displayed

·         Conrad – one input for automatic corner radius

·         Incremental and Absolute programming

·         Program diagnostics

·         CAD/CAM interface

·         Math Helps with prompted, graphical interface

·         Tool stepover adjustable for pocket routines

·         Selectable ramp or plunge cutter entry

·         Spreadsheet editing

·         Global data change

·         Clipboard to copy events between programs

·         Trial run

·         Real time run graphics with tool icon

·         Access to networked drives

·         Automatic file back up routine

·         Program converters

 

 

Request a Quote