Equipment

Browse our ever-growing inventory to find your next machine!

Southwestern Industries Trak DPM-V5 (2003) CNC 3 Axis Miller Prototrak VM CNC Control

Model
Trak DPM-V5

Year
2003

Stock #
104220

Condition
Used

Specifications

Equipped With

https://youtube.com/watch?v=KWHg6YhZoxg&feature=share

Machine specifications

·         Table size – 50” x 12”

·         T-slots (number x width x pitch) – 3 x 63” x 2.52”

·         Travel (X, Y, Z axis) – 40” x 20” x 19”

·         Quill diameter - 4.13”

·         Spindle taper - #40

·         Spindle speed range RPM – 160-4000

·         Spindle center to column face – 20.5”

·         Spindle motor power – 5 HP

·         Power requirement – 50 HZ/60 HZ; 3 phase, 220V, 40 FLA

·         Machine net weight on table – 4400 lbs.

·         Maximum weight of workpiece – 1320 lbs.

·         Height of table from bottom of bed – 48”

·         Maximum spindle nose to table – 19”

·         Minimum table height – 85”

·         Maximum table height – 100”

·         Width of machine including table – 94”

·         Length with electric box door closed – 81”

·         Overall width including full table travel – 136”

·         Overall length with electrical door open – 105”

·         Footprint – 24” x 48.4”

·         Way surface – dovetail X axis; square ways Y and Z axis

·         Weight (approximate) net – 4400 lbs.

·         Weight (approximate) shipping – 4700 lbs.

·         Pallet size – 6’ x 6’

·         Maximum work capacities – Drilling (mild steel) max. dia. 1.00”; tapping, 5/8”; milling capacities, 5 inch3/min

·         Way surfaces hardened and ground

·         Turcite coating on all slide ways

·         Automatic lubrication pump

·         Quill diameter 4.13"

 

ProtoTRAK VM CNC - the control on the TRAK V Series Bed Mills

Hardware Specifications

·         Two or three-axis CNC, three-axis DRO

·         Pentium processor with built-in video and Ethernet cards

·         32 MB or RAM with expansion slots available

·         Hard drive

·         TEAC floppy disk drive

·         Ports and connectors: P/S 2 keyboard and mouse, RS232, RJ45

·         10.4” color active-matrix display

·         Override of programmed feedrate and rapid with graphical indicator

·         Polycarbonate sealed membrane with LED status lights

·         Gasket sealed enclosures

·         Brushless A.C. servomotors rated at 704 in-oz continuous torque

·         Integrated motor encoders with .000025" underlying resolution.

·         250 IPM rapid traverse

·         Precision ground ballscrews in the table, saddle, and column

·         Programmable spindle speed

·         Override of programmed spindle speed with graphical indicator

·         Electronic handwheels

·         Yaskawa AC spindle drive

·         Digital servo amplifiers custom designed for mill operation

·         Auxiliary functions: spray mist, coolant, spindle off and an input to a programmable rotary table or indexer

·         Tapping with a floating tapping head

  Software Specifications

·         Windowsâ operating system with access to Windowsâ desktop

·         Versatile: select between manual, two or three-axis CNC

·         Auto Geometry Engine

·         Two or three-axis circular interpolation

·         Linear interpolation

·         Six modes of operation

·         Color graphics with adjustable views

·         Icon-prompted tool set-up

·         Automatic diameter cutter compensation

·         Tool length offsets with modifiers

·         Advanced diagnostic routines

·         Jog and Power feed in DRO mode

·         Selectable fine/course manual traverse

·         Go To – traverse stops at dimension selected

·         Automatic return to absolute zero

·         Incremental and Absolute position readout

·         Teach-in of manual moves

·         Inch/mm selectable

·         Scaling of print data

·         Alpha-numeric program names

·         Event comments

·         Selectable tool path or part geometry programming

·         Convenient canned cycles for all geometry

·         Circular, rectangular or irregular pockets, islands and profiles

·         Helix and thread milling routines

·         Repeat of programmed events

·         LOOK – program graphics with a single button push

·         List step – graphics with programmed events displayed

·         Conrad – one input for automatic corner radius

·         Incremental and Absolute programming

·         Subroutine and copy of programmed events

·         Mirror with selectable cutting order

·         Rotate

·         Program diagnostics

·         CAD/CAM interface

·         Math helps with prompted graphical interface

·         Tool stepover adjustable for pocket routines

·         Selectable ramp or plunge cutter entry

·         Spreadsheet editingä

·         Global data change

·         Clipboard to copy events between programs

·         Trial run

·         TRAKingâ – manual control of CNC program run

·         Real time run graphics with tool icon

·         Access to networked drives

·         Automatic file back-up routine

 


Request a Quote