Browse our ever-growing inventory to find your next machine!

Southwestern Industries Trak M-11 2-OP (2017) Portable Vertical Machining Center Prototrak PMX CNC Control

Trak M -11 2-OP


Stock #



Equipped With


Table Dimensions

Table size - 18″ x 15″
Number of tee slots and pitch - 4 @ 63 mm
Tee slot width - 0.630″ or 16 mm
Max table load - 500 lbs.
Ball Lock ® hold down force - 2250 lbs. @ 35 in/lbs. of torque
Machine Net/Shipping lbs. - 2825/3175
X, Y, Z Travels - 14″ x 12″ x 17″
Max distance from spindle nose table surface - 20.25″
Min distance from spindle nose table surface - 2.75″
Max swing clearance from spindle center to column - 14″
Max Rapid speed X, Y & Z-axis, inches per minute – 600
Horsepower – 3HP
Tool holder type – BT30
Spindle nose diameter - 2.2″ or 56 mm
Standard: Max RPM – 6,000
Automatic Tool Changer
ATC Tool Capacity – 8
Max tool Diameter – 2″
Retention Knob – BT30
Air Requirements
Air Pressure: 90 psi
Quality: Air dried/filtered water separator upstream of the machineCFM: 2.5 at 90 psi
52"L x 30.5"W x 101"H (Min Height to fit in Doorway is 92") 
Weight- 2,700 LBS

ProtoTRAK System Hardware
ProtoTRAK TMX CNC Three-axis CNC and DRO5.
7" active-matrix color LCD screen
2 USB ports
LED status lights built into display
Uncluttered front panel with few hard keys
Beacon light
Override of program spindle speed
Coolant pump
Networking Software Features 
General Operation
Clear, uncluttered screen display
Prompted data inputs
English language – no codes
Soft keys - change within context
Windows® operating system
Three-axis CNCInch/mm selectable
Rigid Tapping
Reference to ball lock locations on table
Absolute home location
Canned cycles – pockets, profiles,bolt hole patterns, etc
Indexer compatible​

Equipped With: 
Prototrak PMX CNC Corntrol
Vice Fixture Plate
Mag Stop Assy
1-set of Ball Locks 
All cat 30 Tooling shown in picture 
Request a Quote