Equipment

Browse our ever-growing inventory to find your next machine!

Southwestern Industries TRL 1845RX (2020) Prototrak RLX CNC Control

Model
Trak TRL 1845RX

Year
2020

Stock #
104226

Condition
Not specified

Specifications

Equipped With

Machine Specifications
• Height of Centers – 9”
• Distance between centers – 45”
• Swing over bed – 18.1”
• Swing over saddle wings – 17”
• Swing over cross slide – 9.13”
• Cross slide travel – 10.6”
• Tool section max – 1”
• Coolant Reservoir – 13 gallons
• Coolant pump motor – 1/8 HP
• Bed Width – 13.4”
• Bed Height – 12.4”
• Spindle Nose – D1-6
• Spindle through hole – 2.36”
• Spindle Taper – MT #6
• Spindle diameter front bearing – 3.35”
• Number of bearings – 2
• Number of Spindle Speed Ranges – 2
• Spindle Speed Range (RPM) – 80-850, 250-2500
• Spindle HP – 10
• Voltage – 200-240
• Amps/Full Load – 54
• Machine – 200V/3P/60Hz
• Dimensions net (LxWxH) – 88.5” x 49” x 61”
• Dimensions ship (LxWxH) – 91” x 52” x 84”
• Weight net – 3285 lbs.
• Weight ship – 3800 lbs.
• Tail stock quill travel – 6"
• Quill diameter – 2.56"
• Quill taper hole – MT #4
• Dynamic spindle motor brake
• Way surface hardness – 480-560 HB
• Quiet operation
• Dual sliding doors to control chips and coolant with one removable door
• Meehanite cast monolithic base
• Heavy ribbed base construction
• Bedways hardened and ground
• Sliding surfaces Turcite coated
• Dovetails on cross slide, V-ways on saddle
• Adjustable saddle gibs
• Maximum rapid – 400 ipm on z-axis
Equipped With: 
Prototrak RLX CNC Control 
Tailstock 
Advanced Features With/Verify
Networking 
Coolant Pump 
Limit Switch Remote Stop/Go 
Steady Rest 
Traking 

ProtoTRAK RLX System Specifications
Pendant Control Hardware
• Two-axis CNC, two-axis DRO
• Electronic Handwheels for manual operation
• 15.6” LCD with Touchscreen
• Intel® 2.0 GHz processor
• 4 GB Ram
• At least 32GB of mSATA SSD
• 5 USB connectors
• 2 Ethernet Ports (1 for user and 1 for control system)
• Override of program feedrate
• Override of spindle speed
• LED status lights built into run panel
• E-stop
• Spindle Control (FWD, REV, OFF)
• Feed STOP and GO
• Fine vs Course EHW resolution control
• Accessory button to control coolant and AUTO mode in RUN mode
• Power Reset Button
• Jogstick for convenient jog
Computer Module Control Hardware
• 2 axis motor control – X and Z axis, Axis to control CNC Turret
• 14 inputs
• 9 outputs
Software Features – General Operation
• Clear, uncluttered screen display
• Prompted data inputs
• English language – no codes
• Soft keys – change within context
• Windows® operating system
• Color graphics with adjustable views
• Gestures for pan, zoom, rotate
• Inch/mm selectable
• Convenient modes of operation
• Networking
Info Softkeys
• Status
• Tool Table
• EPA
• Math Help
• Warnings
• Defaults
• Keyboard
• Calculator
DRO Mode Features for Manual Machining
• Incremental and absolute dimensions
• Powerfeed X or Z
• GO TO
• Do One – Tapers for any angle
• Do One – Radius
• Do One – Fillet
• MAX RPM – set maximum RPM for spindle to run
• Servo motion to return to home
• Tool offsets from library
• Spindle speed setting with override
Program Mode Features
• Geometry-based programming
• Incremental and absolute dimensions
• Automatic tool nose radius cutter compensation
• Circular interpolation
• Linear interpolation
• Look – graphics at all times
• List step – graphics with programmed events displayed
• Alphanumeric program names
• Canned Cycles
• Program data editing
• Options within events
• Math helps with graphical interface
• Subroutine repeat of programmed events
• Nesting
• Programmable spindle speeds
Canned Cycles
• Position
• Drill
• Bore
• Turn
• Arc
• Cycle
• Thread
• Groove
• Cut Off
Request a Quote